Laboratory leaching studies of oryzalin and diuron through three undisturbed vineyard soil columns

The leaching of diuron and oryzalin through undisturbed soil columns was studied in the laboratory using three vineyard soils from Vosne-Romanée (Burgundy): a rendosol, a calcosol and a vegetated calcosol. After 845 mm of simulated rainfall in 15 days, soil leachates contained higher amounts of diuron (3.2%, 11.8% and 18.8% of applied diuron, respectively) than oryzalin (0.2%, 4.9%, 3.7%, respectively). A greater proportion of soil extractable residues was obtained for diuron (42.5%, 26.8% and 32.2%, respectively) than for oryzalin (14.7%, 12% and 15.5%, respectively). The greater mobility of diuron might be related to its higher water solubility (36.4 mgl(-1) compared with 2.6 mgl(-1) for oryzalin) and smaller adsorption coefficient (400 lkg(-1), compared with 700-1100 lkg(-1) for oryzalin). The mobility of the two herbicides was greater in the two calcosols than in the rendosol, not only due to different organic carbon contents but also different soil textures and structures.     

Evaluation of relative photonic efficiency in heterogeneous photocatalytic reactors

The evaluation of photonic efficiency in heterogeneous photocatalysis remains elusive because the number of absorbed photons is difficult to assess experimentally. The photonic efficiency of heterogeneous photocatalytic reactors depends on the reactor geometry, irradiation source, and photocatalyst properties. In this work, the relative photonic efficiency of heterogeneous photocatalytic reactors to degrade an azo dye was evaluated using phenol as the standard system. The experimental tests were carried out in a batch reactor under different conditions of pH, catalyst dosage, initial concentration, and ultraviolet (UV) lamps. The kinetics of disappearance of both phenol and azo dye were studied using the initial rate method and were described according to the Langmuir-Hinshelwood (L-H) kinetic model. It was observed that the relative photonic efficiency depends on the adsorption/desorption properties of the photocatalyst.     

Ambient ozone in forests of the Central and Eastern European mountains

Ambient ozone (O(3)) concentrations in the forested areas of the Central and Eastern European (CEE) mountains measured on passive sampler networks and in several locations equipped with active monitors are reviewed. Some areas of the Carpathian Mountains, especially in Romania and parts of Poland, as well as the Sumava and Brdy Mountains in the Czech Republic are characterized by low European background concentrations of the pollutant (summer season means approximately 30 ppb). Other parts of the Carpathians, especially the western part of the range (Slovakia, the Czech Republic and Poland), some of the Eastern (Ukraine) and Southern (Romania) Carpathians and the Jizerske Mountains have high O(3) levels with peak values >100 ppb and seasonal means approximately 50 ppb. Large portions of the CEE mountain forests experience O(3) exposures that are above levels recommended for protection of forest and natural vegetation. Continuation of monitoring efforts with a combination of active monitors and passive samplers is needed for developing risk assessment scenarios for forests and other natural areas of the CEE Region.     

Comparing aquatic risk assessment methods for the photosynthesis-inhibiting herbicides metribuzin and metamitron

Three different risk assessment procedures are described that aim to protect freshwater habitats from risks of the photosynthesis-inhibiting herbicides metribuzin and metamitron. These procedures are (1) the first-tier approach, based on standard toxicity tests and the application of an assessment factor, (2) the Species Sensitivity Distribution (SSD) approach, based on laboratory tests with a wider array of species and the application of a statistical model to calculate the HCx (the Hazardous Concentration for x% of the species), and (3) the model ecosystem approach, based on the evaluation of treatment-related effects in field enclosures. A comparison of the risk assessment procedures reveals that the first-tier approach is the most conservative for metamitron and metribuzin, and that HC5 values (and even HC10 values) based on acute EC50 values of algae and aquatic vascular plants may be used to derive maximum permissible concentrations for single applications. For both compounds these HC5 values were very similar to the ecological threshold concentrations in the enclosure studies. In contrast to model ecosystem experiments, however, HCx values based on lab toxicity tests do not provide information on the recovery potential of sensitive endpoints and on indirect effects, which may be important for regulatory decision-making. In the enclosure study, indirect effects of metribuzin on invertebrate populations were observed at an exposure concentration that was approximately 20 times lower than the corresponding HC5 value based on lab toxicity data for aquatic invertebrates.     

Biodegradation of chlorinated solvents in a water unsaturated topsoil

In order to investigate topsoils as potential sinks for chlorinated solvents from the atmosphere, the degradation of trichloromethane (CHCl(3)), 1,1,1-trichloroethane (CH(3)CCl(3)), tetrachloromethane (CCl(4)), trichloroethene (C(2)HCl(3)) and tetrachloroethene (C(2)Cl(4)) was studied in anoxic laboratory experiments designed to simulate denitrifying conditions in water unsaturated topsoil. Active denitrification was demonstrated by measuring the release of 15N in N(2) to the headspace from added 15N labeled nitrate. The degradation of chlorinated aliphatic compounds was followed by measuring their concentrations in the headspace above the soil.The headspace concentrations of all the chlorinated solvents except CH(3)CCl(3) were significantly (P相似文献   

Occurrence of alkylphenol polyethoxylates in the St. Lawrence River and their bioconcentration by mussels (Elliptio complanata)

A study was conducted in 1999 to determine the occurrence of alkylphenol polyethoxylates in the St. Lawrence River and their bioconcentration by mussels (Elliptio complanata). Concentrations of selected contaminants were measured in surface water, municipal effluent, sediments and mussels. Analyses were performed on 4-tert-octylphenol (4-t-OP), 4-n-nonylphenol (4-n-NP), nonylphenol polyethoxylates (NP(1-16)EO), nonylphenol-mono and di-ethoxycarboxylic acids (NP(1)EC and NP(2)EC), and octylphenol-mono and di-ethoxycarboxylic acids (OP(1)EC and OP(2)EC). Mussels (Elliptio complanata) taken from a reference lake were placed in cages and submerged for 62 days at two sites in the St. Lawrence River, 1.5 km upstream and 5 km downstream of the outfall of a municipal wastewater treatment plant. The results showed that many of the target chemicals were present in all matrices studied: in water, at ppt and ppb levels, and reaching ppm levels in sediments and mussels. Concentrations of these contaminants were higher in matrices sampled at the downstream site than in those drawn at the site upstream of the Montreal effluent outfall, especially in sediments. Likewise, the slight, but not significant, bioconcentration of certain alkylphenol polyethoxylates (AP(n)EO) in the mussels was more noticeable at the downstream site than at the upstream site.     

Pollen germination is impeded by tap water

Pollen germination in vitro is totally inhibited in tobacco (Nicotiana tabacum) and other species if tap water is used to prepare the germination medium. This effect is already fully present if tap water accounts for only 25% of the medium. Furthermore, the pollen grains deteriorate rapidly and the culture medium turns yellowish-brown. The water toxicity is not caused by one or several compounds regularly monitored by the water authorities but can be removed by ion exchange purification. Although the factor(s) responsible for the inhibition were not identified, the study clearly shows the presence of such a contaminant in three different Orange County (Southern California) water wells. The fact that a fundamental botanical process like pollen germination is inhibited by a factor in drinking water not included in water quality control causes some general health concern. In addition, crop yield might be largely reduced if overhead spray irrigation with this water is utilized. The experiments also suggest that pollen germination in vitro could serve as a sensitive and simple bioassay for water quality.     

Comparison of microbial community between two shallow freshwater lakes in middle Yangtze basin, East China

In order to investigate the role of the microbial community in aquatic ecology and nutrient transformations in the development of eutrophication in large shallow freshwater lakes along Yangtze River, the microbial community in the depth-related sediment in Lake Chaohu and Lake Longganhu were compared. Lake Chaohu is one of the three most polluted lakes in China. However, the neighboring Lake Longganhu, a mesotrophic lake, is relatively pristine. The total phosphorous (TP) and total nitrogen (TN) concentration in water was detected at 0.193 mgl(-1) and 3.035 mgl(-1) for Lake Chaohu, 0.051 mgl(-1) and 0.774 mgl(-1) for Lake Longganhu, respectively. The population of the microorganisms with various ecological nutrient transforming functions (e.g. phosphate solubilizing, denitrifying and cellulose decomposing) and a batch of environmental parameters concerning the nutrient accumulating and transforming (e.g. total organic carbon, total nitrogen, and total phosphorous concentrations) were assayed in the depth-related sediment samples from several defined points in both lakes. The sediment samples from Lake Chaohu showed higher density of actinomycetes (P<0.05) and phosphate-solubilizing bacteria (P<0.001) and less profusion of denitrifying bacteria (P<0.05) and cellulolytic microbes (P<0.001), compared with those of Lake Longganhu. The data suggested that the current microbial community in the sediment of Lake Chaohu is in favor of sustaining or further accelerating the process of the lake eutrophication. A possible positive feedback loop which consists of sustained growth of microorganisms and gradual decline of lake eutrophic status is worth further discussing.     

The effect of diesel fuel sulfur content on particulate matter emissions for a nonroad diesel generator

The effect of sulfur content on diesel particulate matter (DPM) emissions was studied using a diesel generator (Generac Model SD080, rated at 80 kW) as the emission source to simulate nonroad diesel emissions. A load simulator was used to apply loads to the generator at 0, 25, 50, and 75 kW, respectively. Three diesel fuels containing 500, 2100, and 3700 ppm sulfur by weight were selected as generator fuels. The U.S. Environmental Protection Agency sampling Method 5 "Determination of Particulate Matter Emissions from Stationary Sources" together with Method 1A "Sample and Velocity Traverses for Stationary Sources with Small Stacks or Ducts" was adopted as a reference method for measurement of the exhaust gas flow rate and DPM mass concentration. The effects of various parameters on DPM concentration have been studied, such as fuel sulfur contents, engine loads, and fuel usage rates. The increase of average DPM concentrations from 3.9 mg/Nm3 (n cubic meter) at 0 kW to 36.8 mg/Nm3 at 75 kW is strongly correlated with the increase of applied loads and sulfur content in the diesel fuel, whereas the fuel consumption rates are only a function of applied loads. An empirical correlation for estimating DPM concentration is obtained when fuel sulfur content and engine loads are known for these types of generators: Y = Zm(alphaX + beta), where Y is the DPM concentration, mg/m3, Z is the fuel sulfur content, ppm(w) (limited to 500-3700 ppm(w)), X is the applied load, kW, m is the constant, 0.407, alpha and beta are the numerical coefficients, 0.0118 +/- 0.0028 (95% confidence interval) and 0.4535 +/- 0.1288 (95% confidence interval), respectively.     

Polycyclic aromatic hydrocarbons, black carbon, and molecular markers in soils of Switzerland

Polycyclic aromatic hydrocarbons (PAH) were analysed in 23 soil samples (0–10 cm layer) from the Swiss soil monitoring network (NABO) together with total organic carbon (TOC) and black carbon (BC) concentration, as well as some PAH source diagnostic ratios and molecular markers. The concentrations of the sum of 16 EPA priority PAHs ranged from 50 to 619 μg/kg dw. Concentrations increased from arable, permanent and pasture grassland, forest, to urban soils and were 21–89% lower than median numbers reported in the literature for similar Swiss and European soils. NABO soils contained BC in concentrations from 0.4 to 1.8 mg/g dw, except for two sites with markedly higher levels. These numbers corresponded to 1–6% of TOC and were comparable to the limited published BC data in soil and sediments obtained with comparable analytical methods. The various PAH ratios and molecular markers pointed to a domination of pyrogenically formed PAHs in Swiss soils. In concert, the gathered data suggest the following major findings: (1) gas phase PAHs (naphthalene to fluorene) were long-range transported, cold-condensated at higher altitudes, and approaching equilibrium with soil organic matter (OM); (2) (partially) particle-bound PAHs (phenanthrene to benzo[ghi]perylene) were mostly deposited regionally in urban areas, and not equilibrated with soil OM; (3) Diesel combustion appeared to be a major emission source of PAH and BC in urban areas; and (4) wood combustion might have contributed significantly to PAH burdens in some soils of remote/alpine (forest) sites.